Renewable Energy

Solar Panel

Renewable Energy is energy that is collected from renewable resource, which are naturally replenished on a human timescale, such as sunlight, wind, rain, tides, waves, and geothermal heat.

 

Renewable energy often provides energy in four important areas: electricity generation, air and water heating/cooling, transportation, and rural (off-grid) energy services.

 

Nigeria has enormous solar energy potential, with fairly distributed solar radiation averaging 19.8 MJm2/day and average sunshine hours of 6h/day. The assumed potential for concentrated solar power and photovoltaic generation is around 427,000 MW.

 

According to estimates, the designation of only 5% of suitable land in central and northern Nigeria for solar thermal would provide a theoretical generation capacity of 42,700 MW.

 

SOLAR RADIATIONS: Solar energy is also one of the oldest renewable energy sources in the world. This energy is taken from the sun in the form of solar radiation. There are basically three ways that we can use the sun’s energy;

  • Solar cells in which photovoltaic or photoelectric cells are used to convert light directly into electricity.
  • Solar water heating in which the heat from the sun is used to warm the water in glass panels of solar energy system therefore no longer requiring gas or electricity to heat the water.
  • Furnaces that use mirrors to capture the sun’s energy into a concentrated place to produce high temperatures.

Stable Energy Prices

Renewable energy is providing affordable electricity across the country right now, and can help stabilize energy prices in the future.

 

Although renewable facilities require upfront investments to build, they can then operate at very low cost (for most clean energy technologies, the “fuel” is free). As a result, renewable energy prices can be very stable over time.

 

Moreover, the costs of renewable energy technologies have declined steadily, and are projected to drop even more. For example, the average price to install solar dropped more than 70 percent between 2010 and 2017. The cost of generating electricity from wind dropped 66 percent between 2009 and 2016. Costs will likely decline even further as markets mature and companies increasingly take advantage of economies of scale.

 

In contrast, fossil fuel prices can vary dramatically and are prone to substantial price swings.

 

Using more renewable energy can lower the prices of and demand for natural gas and coal by increasing competition and diversifying our energy supplies. And an increased reliance on renewable energy can help protect consumers when fossil fuel prices spike and the Climate.

 

Needless to say, the intrinsic benefits of Renewable Energy is greatly untapped, which is why, at RS Engineering Global Limited, we are in business to develop and operates utility-scale solar PV projects for the wholesale and retail market in Africa. The Company also provides operation and maintenance (O&M) services for investor/owners.

 

 

We believe solar makes the world cleaner and healthier. Our team successfully develops, builds and operates solar facilities across Africa.”

10 DAILY WORKPLACE SAFETY TIPS

10 DAILY WORKPLACE SAFETY TIPS

————————————————————————————————————————————————–

No one wants to get hurt, but sometimes we neglect best safety practices because it takes extra time and effort, a little extra time is always worth it to avoid an injury.

Checking workplace safety throughout the day is an easy way to keep your working environment safe.

If you are a supervisor, it shows your employees that you care about them and their well-being. It takes leadership to improve safety.”

Being safety oriented can help improve your employees’ morale, productivity, and even make a good impression on visitors.

If you are an employee, following safety protocols are in your and your coworkers’ best interests.

We’ve got 10 good tips for keeping you and other people safe at work below.

Give them a quick review and we hope they help to keep you safe and healthy.

 

1. Inform Supervisors of Unsafe Conditions:

If you see something that could potentially hurt someone, remove the object or clean the area if you can do so safely. Otherwise, inform your supervisor. Since your supervisor is legally obligated to keep you and your fellow employees’ working environment safe, they must take action.

 

2. Use Equipment, Machines, and Tools Properly:

Misusing tools and machines is the most prevalent cause of workplace injuries. When using equipment, make sure that you are using each piece of equipment for its intended purpose and are using it correctly. Furthermore, regularly clean and inspect equipment to ensure that it is safe.

 

3. Wear Safety Equipment (PPEs):

When cleaning up messes and using equipment, make sure you wear the proper safety equipment. Making sure you wear the proper safety equipment and checking that your safety equipment is undamaged significantly lowers your likelihood of getting injured.

However,wearing these PPEs correctly is very Imperative too.

 

4. Prevent Slips and Trips:

As the second most prevalent cause of nonfatal occupational injuries, it is vital to ensure that aisles are clear and spills are cleaned to prevent employees from tripping or slipping. If you are dealing with a liquid, use drip pans and guards. Clean up any spills immediately to keep conditions safe. Also, check your workplace to make sure there are no holes, loose boards, or nails projecting from the floor. If any of these characteristics exist, replace the damaged flooring. In areas that cannot easily be cleaned, consider installing anti-slip flooring.

Few checklist to prevent Slips and Trips
• Use slip-resistant footwear.
• Clean up floors and working surfaces promptly when they become wet.
• Provide warning signs for wet floor areas.
• Practice safe housekeeping procedures, such as cleaning only one side of a passageway at a time.
• Where there are wet or oily processes, maintain drainage, platforms, nonslip mats or floor surfaces, or other dry standing areas. Use no-skid waxes and surfaces coated with grit to create nonslip surfaces in slippery areas such as toilet and shower areas.

 

5. Keep Work Areas and Emergency Exits Clear:

Make sure to remove any clutter blocking emergency exits, equipment shutoffs, and areas that you are working. A cluttered work area can lead to not having enough space to use tools and pick up heavy objects properly. Furthermore, if an exit is obstructed, you may not be able to quickly escape if an emergency occurs. Placing equipment in proper storage areas after use will help keep the work area and emergency exits clear.

 

6. Eliminate Fire Hazards:

If you are using combustible materials in the work environment, only keep the amount you need for the task at hand. When you are not using the flammable material, store the chemical in an assigned safe storage area away from sources of ignition. Also, store combustible waste in metal receptacles and dispose of it daily.
To prevent dust accumulation, use industrial vacuums to frequently clean areas where dust gathers.

 

7. Avoid Tracking Hazardous Materials:

To ensure that hazardous materials are not accidentally tracked into other areas, make sure that work area mats are maintained and kept clean. Prevent cross-contamination by using different cleaning materials—such as mops—for various spills, and change clothes if you spill toxic materials on them. Also, if you work with toxic materials, do not wear your work clothes home.

 

8. Prevent Objects from Falling:

To keep objects from falling, use protections such as nets, toe boards, and toe rails. In addition, stack boxes straight up and down, and place heavy objects on lower shelves. Furthermore, keep stacked objects out of the way of aisles and work areas.

 

9. Use Correct Posture when Lifting:

To avoid injuring your back when you are trying to pick up an item, keep your back straight, use your legs to lift, and pick up the item without stooping or twisting. Whenever possible, use mechanical aids such as a conveyor belt, wheelbarrow, or forklift.

 

10. Take Work Breaks From Time to Time:

Many work-related injuries occur when a worker is tired and cannot adequately observe dangers in their surroundings. By taking regular breaks, you are able to stay more alert when working.

 

Remember:

¶For safety is not a gadget but a state of mind.

¶Better a thousand times careful than once dead